NON-WOVEN CLOTHS


Welcome to Abrasteel, we are distributors and manufacturers of non-woven cloths, among other abrasive products. Our non-woven cloths comply with current regulations in addition to offering great durability and precision. Keep reading!

Non-woven cloths types
FAQs
Contact

NON-WOVEN CLOTHS


Welcome to Abrasteel, we are distributors and manufacturers of non-woven cloths, among other abrasive products. Our non-woven cloths comply with current regulations in addition to offering great durability and precision. Keep reading!

Non-woven cloth types
FAQs
Contact

Non-woven cloth types

Mesh of nonwoven cloth impregnated with abrasive grit and resin. In different formats. For the satin finishing of metals. Available in corundum and silicon carbide grit.

ou can see the technical specifications of our non-woven cloths in our catalog.

Non-woven cloth types

Mesh of nonwoven cloth impregnated with abrasive grit and resin. In different formats. For the satin finishing of metals. Available in corundum and silicon carbide grit.

ou can see the technical specifications of our non-woven cloths in our catalog.

NON-WOVEN FLAP WHEEL WITH SHAFT

Flap wheel assembled in a 6mm shaft. For the satin finishing of pieces.


NON-WOVEN FLAP WHEEL WITH SHAFT

MIXED CLOTH FLAP WHEEL WITH SHAFT

Flap wheel assembled in a 6mm shaft. For the satin pieces and remove surface imperfections.


MIXED CLOTH FLAP WHEEL WITH SHAFT

NON-WOVEN FLAP WHEEL WITH FLANGES

Flap wheel assembled in flanges. For the satin finishing of pieces lower than the width of the flap wheel.


NON-WOVEN FLAP WHEEL WITH FLANGES

NON-WOVEN AND ABRASIVE FLAP WHEEL WITH FLANGES

Mixed flap wheel, it contains non-woven and abrasive cloth and it is assembled in flanges. To give a satin finish of pieces and remove imperfections from the surface of pieces lower than the width of the flap wheel.

NON-WOVEN AND ABRASIVE FLAP WHEEL WITH FLANGES

NON-WOVEN FLAP WHEEL FOR THE JEWELLERY AREA

Ventilated flap wheel for the satin finishing of jewels and costume jewellery

MIXED NON-WOVEN AND ABRASIVE CLOTH FLAP WHEEL WITH FLANGES FOR THE JEWELLERY AREA

Mixed flap wheel, it contains non-woven and abrasive cloth. Assembled to give a satin finish to jewels and costume jewellery and to remove imperfections of the piece to be treated.

MIXED NON-WOVEN AND ABRASIVE CLOTH FLAP WHEEL WITH FLANGES FOR THE JEWELLERY AREA

VENTILATED CORUNDUM NON-WOVEN FLAP WHEEL WITH STAPLE

Ventilated non-woven flap wheel, with aluminium oxide grit with metal staple. For the equalised satin finishing of pieces wider than the flap wheel.

VENTILATED CORUNDUM NON-WOVEN FLAP WHEEL WITH STAPLE

VENTILATED SILICON CARBIDE NON-WOVEN FLAP WHEEL WITH STAPLE

Ventilated non-woven flap wheel, with silicon carbide grit and with metal staple. To give an equalised satin finishing of pieces wider than the flap wheel and to leave a different tone of metal sheet from the aluminium oxide.

VENTILATED SILICON CARBIDE NON-WOVEN FLAP WHEEL WITH STAPLE

VENTILATED CORUNDUM NON-WOVEN FLAP WHEEL WITH FLANGES

Ventilated flap wheel for portable machines. For the satin finishing of pieces greater than the width of the flap wheel.

VENTILATED CORUNDUM NON-WOVEN FLAP WHEEL WITH FLANGES

CORUNDUM NON-WOVEN CLOTH ROLL

Roll of aluminium oxide non-woven cloth for hand or machine works.

CORUNDUM NON-WOVEN CLOTH ROLL

SILICON CARBIDE NON-WOVEN CLOTH ROLL

Roll of silicon carbide non-woven cloth for hand or machine works.

SILICON CARBIDE NON-WOVEN CLOTH ROLL

Non-woven cloth FAQs

1WHAT IS A SCOTCH SHAFT BRUSH FOR?
The brush with a scotch shaft or non-woven fabric is used to satin metals or pieces where the area to be sanded is less than the width of the brush, thus we will avoid that the passes are not seen and we will have a uniform finish.
2WHAT IS A MIXED SHAFT BRUSH FOR?
The brush with a mixed scotch shaft or mixed non-woven fabric is used to refine scratches from previous processes or to round sheet metal edges.
3WHAT GRAINS AND DENSITIES ARE IN A SCOTCH FLAP OR NON-WOVEN FABRIC?
Scotch or non-woven flaps are manufactured in different microns, different types of minerals, or different densities. GRANOMETRIES I MICRONS GRAIN COARSE corresponds to grain 80 GRANO MEDIUM corresponds to grain 100. GRANO FINE corresponds to grain 180. GRAIN VERY FINE corresponds to grain 280. GRANO SUPER FINE corresponds to grain 400. GRANO ULTRA FINE corresponds to grain 600. MICRO FINE corresponds to grain 1200. MINERALS A / O ALUMINUM OXIDE (CORINDON) S / C CARBIDE SILICON DENSITIES DENSITY 5: SOFT DENSITY 7: MEDIUM DENSITY 9: HARD DENSITY 11: VERY HARD
4WHAT IS A VENTILATED SCOTCH BRUSH FOR?
Scotch ventilated brushes are used to satin wide pieces leaving an even finish, these can be manufactured in coarse, medium, fine, very fine grain. They are manufactured from diameter 150mm. up to diameter 400mm.
5WHAT ARE CORINDON OR SILICON CARBIDE NON-WOVEN ROLLS USED FOR?
The rolls of non-woven or scotch fabric as well as the flaps are manufactured in different types of granometries and minerals. GRANOMETRIES I MICRONS GRAIN COARSE corresponds to grain 80 GRANO MEDIUM corresponds to grain 100. GRANO FINE corresponds to grain 180. GRAIN VERY FINE corresponds to grain 280. GRANO SUPER FINE corresponds to grain 400. GRANO ULTRA FINE corresponds to grain 600. MICRO FINE corresponds to grain 1200. MINERALS A / O ALUMINUM OXIDE (CORINDON) S / C CARBIDE SILICON

About Abrasteel

THE COMPANY

The company was founded in 1995. Abrasteel is always committed to providing and offering abrasives with excellent service. We hope that the company continues with the development of our products during the next years. We have supplied abrasives to abrasive distributors and direct customers for many years, and we are proud of our relationships with the service offered. Abrasteel can handle the abrasives needed in almost any market; We offer maximum performance for you. We seek to contribute to its sustainable economic success and mutual benefit.

Contact us


Adress

Marconi s/n, Nave 5
Polígono Industrial Salelles II
08253 Sant Salvador de Guardiola
(Barcelona) - ESPAÑA


Contact

T. +34 93 835 50 20

F. +34 93 835 50 22

info@abrasteel.com

http://www.abrasteel.com/



Social Media

YouTube Facebook Twitter LinkedIn Instagram





I hereby accept the conditions of use to be applied to the Contacts Form.


I hereby accept that my ID Data shall be included for commercial reasons.

To send the message uncheck this box.

BASIC INFORMATION FOR DATA PROTECTION: In order to achieve our task of giving information to the interested parties regarding circumstances and conditions for treating their data and their corresponding rights, we inform you the following:

RESPONSIBLE FOR DATA PROTECTION: Abrasteel, S.L.

PURPOSE FOR DATA MANAGEMENT: We have the right to managing and answer all queries.

DATA FILING: The data shall be filed and maintained in our system the necessary time during our relationship and enforceable according to law, being such to be destroyed after this period through safe procedures of our organization.

LEGITIMACY FOR DATA TREATMENT: Legitimate interest of the interested parties to give service and answer the information form.

ADDRESSEES OF PERSONAL DATA: It is not permitted to allow the data transfer except in those cases in which a legal obligation is binding. There is no forecast of international data transfer.

RIGHTS: The party can revoke the agreement and exercise their Rights to access, rectify, oppose, limit, keep and suppress data, writing to Abrasteel, S.L., in C/ Marconi,5, Polígono Industrial Sale, 08253, Sant Salvador De Guardiola apart from coming to the competent control authority (AEPD).