FLAP WHEELS WITH SHAFT

We are distributors and manufacturers of flap wheels with shaft, among other abrasive products. Our flap wheels with shaft comply with current regulations in addition to offering great durability and precision. Keep reading!

Flap Wheel Types

FAQs

Contact

FLAP WHEELS WITH SHAFT

We are distributors and manufacturers of flap wheels with shaft, among other abrasive products. Our flap wheels with shaft comply with current regulations in addition to offering great durability and precision. Keep reading!

Flap Wheel Types

FAQs

Contact

Flap Wheels with Shaft Types

Aluminium oxide flap wheels with a 6mm shaft and with an “X” backing pad of specific flexibility. For the polishing and finishing of small surfaces with a difficult access on ferric/non-ferric metal applications. Also available with the 8mm shaft and with the M6 shaft (quick change), in aluminium oxide, zirconium and silicon carbide cloth.

You can see the technical specifications of our flap wheels with shaft at our catalog.

Flap Wheels with Shaft Types

Aluminium oxide flap wheels with a 6mm shaft and with an “X” backing pad of specific flexibility. For the polishing and finishing of small surfaces with a difficult access on ferric/non-ferric metal applications. Also available with the 8mm shaft and with the M6 shaft (quick change), in aluminium oxide, zirconium and silicon carbide cloth.

You can see the technical specifications of our flap wheels with shaft at our catalog.

FLAP WHEEL WITH SHAFT

Aluminium oxide flap wheel with a 6mm shaft and with an “X” backing pad of specific flexibility

CIRCONIUM FLAP WHEEL WITH SHAFT

Zirconium flap wheel with a 6mm shaft and with an “X” backing pad of specific flexibility

FLAP WHEEL WITH THREADED SHAFT

Flap wheel with a 6mm metric for a quick change of the flap wheel.

ROD WITH THREADED SHAFT

150mm long mild steel rod for the affix of the flap wheels with threaded shaft.

Flap Wheels with Shaft FAQ's

1IN WHICH DIAMETERS AND AXES CAN BRUSHES WITH A SHAFT BE MADE?

Shaft brushes can be manufactured from a diameter of 10mm to a diameter of 100mm, these can have various widths and grain sizes. Shaft brushes can be manufactured in various shaft types: 3mm shaft, 6mm shaft, 8mm shaft and 6mm metric female threaded shaft.

2IN WHICH FABRICS CAN SHAFT BRUSHES BE MADE?

Shaft brushes can be made of corundum, zirconia, ceramic, silicon carbide or TRIZACTTM 3MTM cloth. Depending on the materials to be worked on, we will use one type of fabric or another. - Corundum fabric: STAINLESS STEEL, ALUMINUM, BRASS, STEEL - Zirconium fabric: STAINLESS STEEL. “Coarse grains” - Ceramic cloth: STAINLESS STEEL, TITANIUM “coarse grains” - Silicon carbide cloth: ALUMINUM, ZAMAC, BRASS, STONE, MARBLE, PORCELAIN MATERIAL. - TRIZAC 3M: STAINLESS STEEL.

3WHY DOES A BRUSH WITH A SHAFT BREAK?

Normally a shaft brush does not have to break as it is a tool that can cause injury to workers. The breaks may be due to excessive revolutions or manufacturing defects.

4POLISHED WITH PYRAMIDAL GRAIN

The pyramidal grain polishing is indicated for applications in stainless steel and aluminum, the virtue of the process is the ease and low roughness that can be achieved in a few steps. This product can be transformed into a band or album.