FLAP WHEELS WITH FLANGES


We are distributors and manufacturers of flap wheels with flanges, among other abrasive products. Our flap wheels with flanges comply with current regulations in addition to offering great durability and precision. Keep reading!

FLAP WHEELS WITH FLANGES


We are distributors and manufacturers of flap wheels with flanges, among other abrasive products. Our flap wheels with flanges comply with current regulations in addition to offering great durability and precision. Keep reading!



Flap Wheels with Flanges Types

Aluminium oxide flap wheels with flanges and with an “X” backing pad of specific flexibility. For the polishing and the finishing of flat, curved and irregular surfaces on ferric/non-ferric metal applications. Available in aluminium oxide, zirconium and silicon carbide.

You can see the technical specifications of our flap wheels with flangesat our catalog.


Flap Wheels with Shaft Types

Aluminium oxide flap wheels with a 6mm shaft and with an “X” backing pad of specific flexibility. For the polishing and finishing of small surfaces with a difficult access on ferric/non-ferric metal applications. Also available with the 8mm shaft and with the M6 shaft (quick change), in aluminium oxide, zirconium and silicon carbide cloth.

You can see the technical specifications of our flap wheels with shaft at our catalog.




Flap Wheels with Flanges FAQ's

1WHAT THE CORE BRUSHES ARE USED FOR?
Core brushes, sometimes referred to as thousand-sheet brushes, are used to fine-tune the roughness of the roughing and refining processes of a surface. These will be used for processes prior to gloss, satin, painted or bath. These can be used together with ABRASTEEL pumice polishing paste, thus they leave a much finer finish than without paste and without losing its aggressiveness.
2IN WHAT DIAMETER AND WIDTH CAN CORE BRUSHES BE MADE?
Core brushes can be manufactured in diameter 80mm up to diameter 600mm with a minimum width of 10mm and up to a maximum of 100mm. They can also be made in other widths (after a feasibility study). These can be manufactured from 40 grit to 600 grit.
3IN WHICH FABRICS CAN CORE BRUSHES BE MADE?
Core brushes can be made from cloth of: Aluminum Oxide, Zirconia, Ceramic, Silicon Carbide, and 3M ™ Trizact ™.

About Abrasteel


THE COMPANY

The company was founded in 1995. Abrasteel is always committed to providing and offering abrasives with excellent service. We hope that the company continues with the development of our products during the next years. We have supplied abrasives to abrasive distributors and direct customers for many years, and we are proud of our relationships with the service offered. Abrasteel can handle the abrasives needed in almost any market; We offer maximum performance for you. We seek to contribute to its sustainable economic success and mutual benefit.

Contact us



Adress

Marconi s/n, Nave 5
Polígono Industrial Salelles II
08253 Sant Salvador de Guardiola
(Barcelona) - ESPAÑA


Contact

T. +34 93 835 50 20

F. +34 93 835 50 22

info@abrasteel.com

http://www.abrasteel.com/



Social Media

YouTube Facebook Twitter LinkedIn Instagram





I read and accept Legal Page y la Privacy Policy.

I agree to receive the information that the entity deems appropriate to send me by email or equivalent electronic methods of communication. (It is possible to unsubscribe at any time).

To send the message uncheck this box.