{"id":7804,"date":"2026-07-19T11:56:03","date_gmt":"2026-07-19T10:56:03","guid":{"rendered":"https:\/\/www.abrasteel.com\/?p=7804"},"modified":"2026-08-06T16:51:59","modified_gmt":"2026-08-06T15:51:59","slug":"foundry-grinding-discs","status":"publish","type":"post","link":"https:\/\/www.abrasteel.com\/en\/blog\/abrasive-discs\/foundry-grinding-discs\/","title":{"rendered":"Foundry grinding discs in 2026"},"content":{"rendered":"<article style=\"width:100%;max-width:1040px;box-sizing:border-box;margin:0 auto;padding:0 0 clamp(48px,10vw,80px);color:#232323;font-family:Manrope,Arial,sans-serif;font-size:clamp(16px,4vw,18px);line-height:1.68;overflow-wrap:anywhere;word-break:break-word;\">\n<header style=\"padding:clamp(14px,4vw,18px) 0 clamp(22px,6vw,28px);border-bottom:1px solid #e8ebef;margin-bottom:24px;\">\n<p style=\"margin:0 0 10px;color:#cc0000;font-size:13px;font-weight:800;letter-spacing:.08em;text-transform:uppercase;\">Abrasive discs<\/p>\n<p style=\"max-width:900px;margin:0;color:#555f66;font-size:clamp(17px,4.4vw,20px);line-height:1.58;\">A technical guide to <strong style=\"color:#111;font-weight:800;\">grinding discs for foundry<\/strong> work: parting-line flash, riser stubs and deflashing cast parts in series production.<\/p>\n<\/header>\n<nav aria-label=\"Table of contents\" style=\"margin:0 0 30px;padding:clamp(16px,4vw,20px) clamp(16px,5vw,22px);background:#ffffff;border:1px solid #e8ebef;border-top:3px solid #023a51;\">\n<p style=\"margin:0 0 12px;color:#023a51;font-size:15px;font-weight:800;text-transform:uppercase;\">Table of contents<\/p>\n<ol style=\"margin:0 0 0 22px;padding:0;font-size:clamp(16px,4vw,17px);line-height:1.62;\">\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#claves-fundicion\">7 keys for choosing grinding discs in foundry work<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#aplicaciones-fundicion\">Deflashing operations on the cast part<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#errores-fundicion\">Common mistakes when grinding cast parts<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#productos-fundicion\">Abrasteel grinding discs for foundry<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#abrasteel-fundicion\">Abrasteel as a technical supplier for foundry<\/a><\/li>\n<li style=\"margin:0;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#preguntas-frecuentes\">Frequently Asked Questions (FAQs)<\/a><\/li>\n<\/ol>\n<\/nav>\n<div style=\"margin:0 0 26px;\">\n<p style=\"margin:0 0 10px;\"><strong style=\"color:#111;font-weight:800;\">These are the 7 criteria we recommend reviewing:<\/strong><\/p>\n<ol style=\"margin:0 0 18px 24px;padding:0;\">\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Casting type: grey iron, ductile iron or cast steel<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Mould sand residue on the part<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Volume of parting-line flash<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Riser stub left after cutting<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Final dimension and subsequent machining<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Safety against dust and projection<\/strong><\/li>\n<li style=\"margin:0;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Cost per deflashed part<\/strong><\/li>\n<\/ol><\/div>\n<p style=\"margin:0 0 18px;\">When a part comes out of the mould, it is not finished. It carries flash along the <strong style=\"color:#111;font-weight:800;\">parting line<\/strong>, riser and sprue stubs already cut but not yet flush, and often <strong style=\"color:#111;font-weight:800;\">mould sand<\/strong> stuck to the contact areas. All of that has to be removed before the part goes to machining, dimensional inspection or paint, and that stage is deflashing.<\/p>\n<p style=\"margin:0 0 18px;\">The technical problem with foundry work is that the material does not behave like clean rolled steel. The as-cast surface can have a <strong style=\"color:#111;font-weight:800;\">skin<\/strong> harder than the core, sand inclusions and a structure that is far more abrasive on the disc. A consumable designed for rolled profile wears out much faster on a cast part, and that wear multiplies across the whole batch.<\/p>\n<p style=\"margin:0 0 18px;\">This is the economic key of the sector: in foundry work you almost never deflash a single part, you deflash hundreds or thousands. Any variation in disc <strong style=\"color:#111;font-weight:800;\">service life<\/strong> multiplies across the full run. That is why the buying criterion cannot be price per disc, but how many parts each disc finishes before wearing out.<\/p>\n<p style=\"margin:0 0 22px;\">It is worth separating two operations that often get confused. Cutting off risers and sprues is <strong style=\"color:#111;font-weight:800;\">cutting<\/strong>: material is separated, and we cover it in <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/blog\/abrasive-discs\/foundry-cutting-discs\/\">cutting discs for foundry<\/a>. Removing flash, flushing the riser stub and conditioning the surface is grinding, and that is what this article covers.<\/p>\n<figure style=\"margin:24px 0 30px;padding:14px;background:#f9fafb;border:1px solid #e8ebef;\">\n    <img decoding=\"async\" style=\"display:block;width:100%;height:auto;aspect-ratio:3\/2;object-fit:contain;background:#ffffff;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-desbaste-basic.jpg\" alt=\"Abrasteel grinding disc for deflashing foundry parts\"><figcaption style=\"margin:10px 0 0;color:#555f66;font-size:15px;\">In foundry work the disc grinds against as-cast skin and residual sand: wear multiplies across the whole batch.<\/figcaption><\/figure>\n<h2 id=\"claves-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">7 keys for choosing grinding discs in foundry work<\/h2>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">1. Casting type: grey iron, ductile iron or cast steel<\/h3>\n<p style=\"margin:0 0 16px;\">Not every casting deflashes the same way. <strong style=\"color:#111;font-weight:800;\">Grey iron<\/strong> is more brittle and the flash breaks off easily, though it generates a lot of dust. Ductile iron has greater toughness and the flash resists more, calling for an impact-resistant disc. Cast steel behaves closer to rolled steel in hardness, though it retains inclusions typical of the casting process.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">2. Mould sand residue on the part<\/h3>\n<p style=\"margin:0 0 16px;\">Sand still stuck to the part behaves as extra abrasive material that is not part of the metal itself: it wears the disc without contributing to the actual work. It is the most underrated cause of <strong style=\"color:#111;font-weight:800;\">premature wear<\/strong> in deflashing, and it is often better solved by improving shot blasting or shakeout cleaning than by switching consumable.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">3. Volume of parting-line flash<\/h3>\n<p style=\"margin:0 0 16px;\">The flash along the mould&#8217;s parting line runs the full contour of the part and its height depends on how well the mould halves closed. A well-fitted mould leaves fine flash needing a quick pass; a poor fit leaves thick, continuous <strong style=\"color:#111;font-weight:800;\">flash<\/strong> that demands far more stock removal and pushes up consumption per part.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">4. Riser stub left after cutting<\/h3>\n<p style=\"margin:0 0 16px;\">Once <strong style=\"color:#111;font-weight:800;\">risers<\/strong> are separated, a solid stub almost always remains that has to be flushed to the surface. That stub is solid material, not fine flash, and calls for a disc with real stock-removal capacity. The cleaner the previous cut, the less grinding work is left here.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">5. Final dimension and subsequent machining<\/h3>\n<p style=\"margin:0 0 16px;\">Deflashing must not eat into the machining allowance. If the disc removes too much in an area that will later be machined, the part can end up out of <strong style=\"color:#111;font-weight:800;\">tolerance<\/strong> and turn into scrap after the casting investment has already been made. Knowing which faces go to machining and which stay as-cast is essential before choosing aggressiveness.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">6. Safety against dust and projection<\/h3>\n<p style=\"margin:0 0 16px;\">Deflashing castings generates more fine dust than grinding clean metal, especially with grey iron and residual sand. Beyond standard eye and ear protection, respiratory protection and station extraction need reinforcing, because exposure runs the whole shift and is not occasional.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">7. Cost per deflashed part<\/h3>\n<p style=\"margin:0 0 16px;\">The useful metric is not the disc price but the <strong style=\"color:#111;font-weight:800;\">cost per part<\/strong>: how many parts it finishes before wearing out and how many changes it forces per shift. In series production, a small improvement in service life multiplies across the whole batch and usually more than offsets a higher unit price.<\/p>\n<h2 id=\"aplicaciones-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Deflashing operations on the cast part<\/h2>\n<p style=\"margin:0 0 16px;\">Deflashing in foundry work is not one single operation but a sequence with different demands. Flushing a riser stub calls for raw stock removal; dressing the parting line calls for consistency and control; conditioning a face before paint calls for finish. Using the same aggressive disc for all three is the most expensive shortcut on the floor.<\/p>\n<p style=\"margin:0 0 16px;\">Ordering the operations helps assign the right abrasive to each and avoids burning a stock-removal disc on a minor touch-up. The table below summarises the usual cases at the <strong style=\"color:#111;font-weight:800;\">deflashing<\/strong> station.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;border:1px solid #e8ebef;\">\n<table style=\"width:100%;min-width:680px;border-collapse:collapse;background:#fff;\">\n<thead>\n<tr>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Operation<\/th>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Typical problem<\/th>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Abrasive decision<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Flushing the riser stub<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Solid stub protruding.<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Grinding with real stock removal.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Dressing the parting line<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Continuous flash along the part.<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Stable, controllable disc.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Cleaning skin and sand<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Abrasive material wearing the disc.<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Pre-cleaning before grinding.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:14px;vertical-align:top;\">Conditioning before paint<\/td>\n<td style=\"padding:14px;vertical-align:top;\">Deep marks visible under coating.<\/td>\n<td style=\"padding:14px;vertical-align:top;\">Finish with flap disc.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Flushing the riser stub<\/h3>\n<p style=\"margin:0 0 16px;\">This is the most demanding operation at the station. Once the riser is separated, a solid stub remains that must sit flush with the surface. Here the disc works against full cross-section, not fine flash, and needs sustained stock-removal capacity. The cleaner the previous <strong style=\"color:#111;font-weight:800;\">cut<\/strong>, the smaller the stub and the less disc is consumed at this stage.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Dressing the parting line<\/h3>\n<p style=\"margin:0 0 16px;\">Parting-line flash runs around the part&#8217;s contour and is usually the most repetitive task. It does not require heavy removal, but consistency: the operator covers metres of perimeter part after part. A disc that vibrates or loses its bite midway forces a second pass and adds fatigue to an already monotonous task.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Cleaning skin and residual sand<\/h3>\n<p style=\"margin:0 0 16px;\">When the part arrives with as-cast skin and poorly removed <strong style=\"color:#111;font-weight:800;\">mould sand<\/strong>, the disc pays the price. Coordinating with shot blasting or the shakeout area for effective pre-cleaning noticeably extends consumable life. It is a process improvement that usually pays off more than switching disc reference.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Conditioning before paint or coating<\/h3>\n<p style=\"margin:0 0 16px;\">Many cast parts are painted or coated on their as-cast visible face, without machining. In those cases deflashing is also surface preparation: it has to be left uniform, without grooves that show through the coating. The logical approach is to start with grinding and finish with a <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/blade-discs\/\">flap disc<\/a> to uniform the <strong style=\"color:#111;font-weight:800;\">finish<\/strong>.<\/p>\n<h2 id=\"errores-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Common mistakes when grinding cast parts<\/h2>\n<p style=\"margin:0 0 16px;\">The most costly mistake is using a general-purpose disc built for rolled steel on castings with inclusions. The result is much faster wear than expected and a cost per part that does not match planned <strong style=\"color:#111;font-weight:800;\">production<\/strong>, usually spotted when the batch is already half done.<\/p>\n<p style=\"margin:0 0 16px;\">Another common failure is not distinguishing between deflashing stages and attacking the parting line with the same aggressive disc used to flush the riser stub. Stock-removal consumable gets burned on a task that called for control, and marks are left in areas that need reworking afterwards.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Eating into the machining allowance<\/h3>\n<p style=\"margin:0 0 16px;\">Deflashing without knowing which faces will be machined can leave the part out of tolerance. It is a particularly expensive mistake because it is caught late, at dimensional inspection, when the part has already accumulated the cost of casting and deflashing. Marking on the job sheet which zones allow removal and which do not prevents turning good parts into <strong style=\"color:#111;font-weight:800;\">scrap<\/strong>.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Treating every alloy the same<\/h3>\n<p style=\"margin:0 0 16px;\">Grey iron, ductile iron and cast steel do not respond alike. Fixing a single reference for the whole plant works until a batch of a different <strong style=\"color:#111;font-weight:800;\">alloy<\/strong> comes in and consumption spikes without obvious explanation. Separating references by casting family, or at least identifying the type before the shift, prevents that silent extra cost.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Not logging consumption by casting batch<\/h3>\n<p style=\"margin:0 0 16px;\">Each casting batch can vary slightly in hardness even under the same alloy reference. Keeping a simple log of parts finished per disc allows fast detection of an unusually abrasive batch, before that extra cost accumulates across the whole <strong style=\"color:#111;font-weight:800;\">run<\/strong>.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Neglecting dust exposure<\/h3>\n<p style=\"margin:0 0 16px;\">Deflashing is a full-shift task, not an occasional operation. That turns fine <strong style=\"color:#111;font-weight:800;\">dust<\/strong> exposure into a real accumulated risk, worsened when sand remains on the part. Reinforcing station extraction and respiratory protection is not optional in this environment, in line with general guidance such as the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.cdc.gov\/niosh\/topics\/silica\/\" target=\"_blank\" rel=\"noopener\">CDC NIOSH guidance on respirable silica dust<\/a>.<\/p>\n<h2 id=\"productos-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Abrasteel grinding discs for foundry<\/h2>\n<div style=\"display:grid;grid-template-columns:repeat(auto-fit,minmax(min(100%,250px),1fr));gap:18px;margin:24px 0;\">\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-desbaste-basic.jpg\" alt=\"Abrasteel grinding disc for foundry deflashing\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">Grinding discs<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">Family for <strong style=\"color:#111;font-weight:800;\">flushing riser stubs<\/strong> and dressing the parting line.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/rough-discs\/\">View family<\/a><\/p>\n<\/div>\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-top-aleaciones-hierro-acero-inoxidable.webp\" alt=\"Abrasteel cutting disc for separating risers and sprues\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">Cutting discs<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">Previous stage: <strong style=\"color:#111;font-weight:800;\">separating risers<\/strong> and sprues.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/blog\/abrasive-discs\/foundry-cutting-discs\/\">View cutting for foundry<\/a><\/p>\n<\/div>\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-xtrem-para-aceros-inoxidables.jpg\" alt=\"Abrasteel reference for cast stainless steel parts\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">Stainless solution<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">For cast <strong style=\"color:#111;font-weight:800;\">stainless<\/strong> parts without ferritic contamination.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/rough-discs\/\">View family<\/a><\/p>\n<\/div><\/div>\n<p style=\"margin:0 0 16px;\">The full range is on <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/rough-discs\/\">Abrasteel grinding discs<\/a>, ordered by stock-removal level and material. To finish visible faces before paint, combine with <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/blade-discs\/\">flap discs<\/a>. You can also download the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/wp-content\/uploads\/2022\/06\/Catalogo2017.pdf\">full catalogue<\/a> to compare formats per <strong style=\"color:#111;font-weight:800;\">production<\/strong> line.<\/p>\n<h2 id=\"abrasteel-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Abrasteel as a technical supplier for foundry<\/h2>\n<p style=\"margin:0 0 16px;\">Abrasteel works with foundries that need discs capable of performing on abrasive material without losing service life part after part. When we advise, we do not just ask which disc is used: we ask what type of casting comes in, how much flash arrives from the mould, whether the part goes to machining, and what <strong style=\"color:#111;font-weight:800;\">volume<\/strong> the run has.<\/p>\n<p style=\"margin:0 0 16px;\">With that data we help calculate the real cost per part and separate the cutting reference from the grinding one, which is where most consumable is lost through cross-use. If your plant mixes grey iron, ductile iron and cast steel on the same line, we can also help you set up a simple reference matrix by <strong style=\"color:#111;font-weight:800;\">alloy<\/strong> so the operator does not have to decide on the fly. You can reach us via <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/contact\/\">contact<\/a> to review your case.<\/p>\n<p style=\"margin:0 0 16px;\">Baseline safety standards such as <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.osha.gov\/laws-regs\/regulations\/standardnumber\/1910\/1910.215\" target=\"_blank\" rel=\"noopener\">OSHA 1910.215 on abrasive wheel machinery<\/a> and the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.hse.gov.uk\/pubns\/priced\/hsg17.pdf\" target=\"_blank\" rel=\"noopener\">HSE HSG17 guidance on the safe use of abrasive wheels<\/a> are worth keeping alongside your foundry-specific dust protocols when documenting the deflashing station.<\/p>\n<h2 id=\"preguntas-frecuentes\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Frequently Asked Questions (FAQs)<\/h2>\n<div style=\"margin:0 0 28px;border-top:1px solid #e8ebef;\">\n<details open style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">What is the difference between cutting off risers and grinding the cast part?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Cutting off risers and sprues separates material and is done with a cutting disc. Grinding removes parting-line flash and flushes the riser stub left after that cut. They are consecutive stages and each needs its own consumable: crossing them shortens disc life significantly.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Why does a standard disc wear out so fast in foundry work?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Because the cast part can have an as-cast skin harder than the core plus mould sand inclusions acting as extra abrasive. A disc built for clean rolled profile wears out much sooner, and that consumption multiplies across the whole batch.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Is grey iron deflashed the same as ductile iron?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">No. Grey iron is more brittle and the flash breaks off easily, though it generates more dust. Ductile iron has greater toughness, the flash resists more and calls for an impact-resistant disc. It is worth identifying the casting type before fixing the reference.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">How do I avoid deflashing leaving a part out of tolerance?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">By identifying beforehand which faces go to machining and which stay as-cast, so as not to eat into the planned allowance. It is an expensive mistake because it is caught at dimensional inspection, when the part has already accumulated the cost of casting and deflashing.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">How is the real disc cost calculated in series production?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">By dividing the disc price by the number of parts it finishes before wearing out, not by disc unit. Presenting the figure as cost per finished part lets production and procurement share the same criterion when evaluating a better-performing reference.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">What extra protection does the deflashing station need?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Beyond eye and ear protection, reinforce respiratory protection and station extraction. Deflashing foundry parts generates more fine dust than clean metal, and since it is a full-shift task, exposure is accumulated rather than occasional.<\/p>\n<\/div>\n<\/details><\/div>\n<div data-abrasteel-sticky-cta=\"true\" aria-label=\"Abrasteel quick actions\" style=\"position:fixed;right:max(12px,env(safe-area-inset-right));bottom:max(12px,env(safe-area-inset-bottom));z-index:9999;width:min(260px,calc(100vw - 24px));max-height:calc(54vh - 24px);background:#ffffff;border:1px solid rgba(2,58,81,.16);box-shadow:0 18px 44px rgba(2,58,81,.20);overflow:auto;\">\n<div style=\"height:6px;background:linear-gradient(90deg,#cc0000 0%,#cc0000 38%,#023a51 38%,#023a51 100%);\"><\/div>\n<p><button type=\"button\" aria-label=\"Close notice\" onclick=\"this.closest('[data-abrasteel-sticky-cta]').style.display='none';\" style=\"position:absolute;top:10px;right:10px;z-index:2;width:32px;height:32px;border:1px solid #e8ebef;background:#ffffff;color:#023a51;font-size:18px;line-height:1;font-weight:800;cursor:pointer;\">x<\/button><\/p>\n<div style=\"padding:clamp(12px,3.5vw,16px) clamp(12px,3.5vw,16px) clamp(10px,3vw,14px);\">\n<p style=\"margin:0 0 6px;color:#cc0000;font-size:13px;font-weight:800;letter-spacing:.06em;text-transform:uppercase;\">Abrasteel support<\/p>\n<p style=\"margin:0 0 8px;color:#023a51;font-size:clamp(18px,4.8vw,20px);line-height:1.18;font-weight:800;\">Deflashing foundry parts?<\/p>\n<p style=\"margin:0 0 12px;color:#555f66;font-size:clamp(14px,4vw,16px);line-height:1.45;\">We help you cut the cost per part.<\/p>\n<\/div>\n<p><a style=\"display:block;padding:clamp(11px,3.2vw,13px) 14px;background:#cc0000;color:#fff;font-size:clamp(14px,3.8vw,15px);font-weight:800;text-align:center;text-decoration:none;\" href=\"https:\/\/www.abrasteel.com\/en\/contact\/\">Ask for technical advice<\/a><a style=\"display:block;padding:clamp(11px,3.2vw,13px) 14px;background:#000;color:#fff;font-size:clamp(14px,3.8vw,15px);font-weight:800;text-align:center;text-decoration:none;\" href=\"https:\/\/www.abrasteel.com\/wp-content\/uploads\/2022\/06\/Catalogo2017.pdf\" target=\"_blank\" rel=\"noopener\">Download catalogue<\/a><\/div>\n<\/article>\n","protected":false},"excerpt":{"rendered":"<p>Guide to choosing grinding discs for foundry work: parting-line flash, riser stubs, mould sand and cost per finished part.<\/p>\n","protected":false},"author":1,"featured_media":4284,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[178],"tags":[],"class_list":["post-7804","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abrasive-discs"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7804","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/comments?post=7804"}],"version-history":[{"count":3,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7804\/revisions"}],"predecessor-version":[{"id":8509,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7804\/revisions\/8509"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/media\/4284"}],"wp:attachment":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/media?parent=7804"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/categories?post=7804"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/tags?post=7804"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}