{"id":7791,"date":"2026-07-10T11:02:21","date_gmt":"2026-07-10T10:02:21","guid":{"rendered":"https:\/\/www.abrasteel.com\/?p=7791"},"modified":"2026-08-06T16:51:26","modified_gmt":"2026-08-06T15:51:26","slug":"foundry-cutting-discs","status":"publish","type":"post","link":"https:\/\/www.abrasteel.com\/en\/blog\/abrasive-discs\/foundry-cutting-discs\/","title":{"rendered":"Foundry cutting discs in 2026"},"content":{"rendered":"<article style=\"width:100%;max-width:1040px;box-sizing:border-box;margin:0 auto;padding:0 0 clamp(48px,10vw,80px);color:#232323;font-family:Manrope,Arial,sans-serif;font-size:clamp(16px,4vw,18px);line-height:1.68;overflow-wrap:anywhere;word-break:break-word;\">\n<header style=\"padding:clamp(14px,4vw,18px) 0 clamp(22px,6vw,28px);border-bottom:1px solid #e8ebef;margin-bottom:24px;\">\n<p style=\"margin:0 0 10px;color:#cc0000;font-size:13px;font-weight:800;letter-spacing:.08em;text-transform:uppercase;\">Abrasive discs<\/p>\n<p style=\"max-width:900px;margin:0;color:#555f66;font-size:clamp(17px,4.4vw,20px);line-height:1.58;\">A technical guide to <strong style=\"color:#111;font-weight:800;\">cutting discs for foundry<\/strong> work: risers, sprues and cast parts.<\/p>\n<\/header>\n<nav aria-label=\"Table of contents\" style=\"margin:0 0 30px;padding:clamp(16px,4vw,20px) clamp(16px,5vw,22px);background:#ffffff;border:1px solid #e8ebef;border-top:3px solid #023a51;\">\n<p style=\"margin:0 0 12px;color:#023a51;font-size:15px;font-weight:800;text-transform:uppercase;\">Table of contents<\/p>\n<ol style=\"margin:0 0 0 22px;padding:0;font-size:clamp(16px,4vw,17px);line-height:1.62;\">\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#claves-fundicion\">7 criteria for choosing cutting discs in foundry work<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#aplicaciones-fundicion\">Common applications on cast parts<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#errores-fundicion\">Common mistakes when cutting cast pieces<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#productos-fundicion\">Abrasteel cutting discs for foundry<\/a><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#abrasteel-fundicion\">Abrasteel as a technical supplier<\/a><\/li>\n<li style=\"margin:0;padding-left:4px;\"><a style=\"color:#023a51;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"#preguntas-frecuentes\">Frequently Asked Questions (FAQs)<\/a><\/li>\n<\/ol>\n<\/nav>\n<div style=\"margin:0 0 26px;\">\n<p style=\"margin:0 0 10px;\"><strong style=\"color:#111;font-weight:800;\">These are the 7 criteria we recommend reviewing:<\/strong><\/p>\n<ol style=\"margin:0 0 18px 24px;padding:0;\">\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Hardness and abrasiveness of the cast material<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Cutting risers and sprues<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Diameter and machine power in foundry<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Service life against highly abrasive parts<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Safety against particle projection<\/strong><\/li>\n<li style=\"margin:0 0 5px;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Difference between cutting and grinding flash<\/strong><\/li>\n<li style=\"margin:0;padding-left:4px;\"><strong style=\"color:#111;font-weight:800;\">Cost per part in series production<\/strong><\/li>\n<\/ol><\/div>\n<p style=\"margin:0 0 18px;\"><strong style=\"color:#111;font-weight:800;\">Foundry<\/strong> parts arrive from the casting process with elements that are not part of the final piece: risers, sprues, feeding channels and flash solidified along the mould parting lines. Separating these elements with the right cutting disc is the first step before any subsequent machining or finishing.<\/p>\n<p style=\"margin:0 0 18px;\">The technical challenge in this sector is that cast material does not behave like rolled steel: it can have <strong style=\"color:#111;font-weight:800;\">higher surface hardness<\/strong>, sand inclusions from the mould, and a more abrasive structure for the disc. A disc designed for conventional steel can wear out much faster when working on a cast piece, driving up consumption in series production.<\/p>\n<p style=\"margin:0 0 22px;\">At Abrasteel we work with foundries that need to separate sprues and risers efficiently before moving to grinding stages. It is worth clarifying from the start that this content covers exclusively <strong style=\"color:#111;font-weight:800;\">cutting<\/strong>; for removing surface flash after the cut, the correct operation is grinding, with a different product and criteria. Standards such as <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.osha.gov\/laws-regs\/regulations\/standardnumber\/1910\/1910.215\" target=\"_blank\" rel=\"noopener\">OSHA 1910.215 on abrasive wheel machinery<\/a> apply directly to any cutting station handling cast material.<\/p>\n<figure style=\"margin:24px 0 30px;padding:14px;background:#f9fafb;border:1px solid #e8ebef;\">\n    <img decoding=\"async\" style=\"display:block;width:100%;height:auto;aspect-ratio:3\/2;object-fit:contain;background:#ffffff;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-top-aleaciones-hierro-acero-inoxidable.webp\" alt=\"Abrasteel cutting disc for foundry parts\"><figcaption style=\"margin:10px 0 0;color:#555f66;font-size:15px;\">Cutting risers and sprues in foundry work requires discs built for materials more abrasive than rolled steel.<\/figcaption><\/figure>\n<h2 id=\"claves-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">7 criteria for choosing cutting discs in foundry work<\/h2>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">1. Hardness and abrasiveness of the cast material<\/h3>\n<p style=\"margin:0 0 16px;\">Iron or steel castings, whatever the <strong style=\"color:#111;font-weight:800;\">alloy<\/strong> family, can show areas of higher surface hardness than the base metal, plus inclusions from the mould. This means the disc works under tougher conditions than on a conventional rolled profile.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">2. Cutting risers and sprues<\/h3>\n<p style=\"margin:0 0 16px;\">The <strong style=\"color:#111;font-weight:800;\">riser and sprue<\/strong> usually have a larger cross-section than the finished part, and separating them is one of the first operations after shakeout. The disc must handle repeated cuts of varying cross-section without losing performance from part to part.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">3. Diameter and machine power in foundry<\/h3>\n<p style=\"margin:0 0 16px;\">Foundries combine fixed cut-off saws for large <strong style=\"color:#111;font-weight:800;\">sprues<\/strong> with portable angle grinders for point adjustments. The disc&#8217;s <strong style=\"color:#111;font-weight:800;\">diameter<\/strong> must match each machine, avoiding forcing small equipment into cuts that require greater power.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">4. Service life against highly abrasive parts<\/h3>\n<p style=\"margin:0 0 16px;\">A general-purpose disc can wear out very quickly if the cast piece contains abrasive inclusions. In series production, that loss of service life translates directly into <strong style=\"color:#111;font-weight:800;\">more disc changes per shift<\/strong> and higher cost per finished piece.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">5. Safety against particle projection<\/h3>\n<p style=\"margin:0 0 16px;\">Cutting cast pieces, especially with residual moulding sand, can generate more particle projection than cutting clean metal. Reinforcing <strong style=\"color:#111;font-weight:800;\">operator<\/strong> protection, verifying correct disc mounting and keeping guards properly adjusted is especially important in this environment.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">6. Difference between cutting and grinding flash<\/h3>\n<p style=\"margin:0 0 16px;\">Separating risers and <strong style=\"color:#111;font-weight:800;\">sprues<\/strong> is cutting; removing surface flash along the mould parting line is grinding. Using a cutting disc to smooth fine flash reduces its <strong style=\"color:#111;font-weight:800;\">service life<\/strong> and lacks the control a grinding disc built for that operation provides.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">7. Cost per part in series production<\/h3>\n<p style=\"margin:0 0 16px;\">In series foundry work, disc cost should be measured per <strong style=\"color:#111;font-weight:800;\">finished part<\/strong>, not per disc unit. A disc with better performance on abrasive material can reduce the number of changes per batch, cut unplanned downtime, and improve overall production rhythm across a full shift.<\/p>\n<h2 id=\"aplicaciones-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Common applications on cast parts<\/h2>\n<p style=\"margin:0 0 16px;\">Foundry cutting spans different stages of the process, from initial shakeout through to final adjustments before machining or finishing.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;border:1px solid #e8ebef;\">\n<table style=\"width:100%;min-width:680px;border-collapse:collapse;background:#fff;\">\n<thead>\n<tr>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Foundry application<\/th>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Technical criterion<\/th>\n<th style=\"padding:14px;background:#023a51;color:#fff;text-align:left;font-weight:800;border-bottom:1px solid #e8ebef;\">Product to consider<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Cutting sprues and risers<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Resistance to abrasive material.<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">TOP for intensive consumption.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Point adjustments with portable grinder<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">Precision on small parts.<\/td>\n<td style=\"padding:14px;border-bottom:1px solid #e8ebef;vertical-align:top;\">BASIC for general use.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:14px;vertical-align:top;\">Cast parts in stainless steel<\/td>\n<td style=\"padding:14px;vertical-align:top;\">Avoiding ferritic contamination.<\/td>\n<td style=\"padding:14px;vertical-align:top;\">XTREM when the material requires it.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Shakeout stage<\/h3>\n<p style=\"margin:0 0 16px;\">As soon as the part is removed from the mould, it is common to separate the sprue and the main <strong style=\"color:#111;font-weight:800;\">risers<\/strong> using fixed, higher-power equipment. At this stage the volume of material to be cut is greater, and the disc must keep consistent performance across long batch runs.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Finishing stage before machining<\/h3>\n<p style=\"margin:0 0 16px;\">Before the part goes to machining, there are usually minor remnants of the feeding channel or mould parting line flash adjusted with a portable grinder. Here the criterion shifts towards precision and control rather than cutting volume.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Batch runs versus one-off cast parts<\/h3>\n<p style=\"margin:0 0 16px;\">A foundry running long series of identical parts can standardise its disc reference around the specific <strong style=\"color:#111;font-weight:800;\">alloy<\/strong> and casting process used, since consumption patterns stay predictable shift after shift. A jobbing foundry producing one-off or short-run cast pieces faces a different challenge entirely: material hardness and inclusion levels can vary significantly from one job to the next, which makes a slightly more versatile mid-range reference a safer default than optimising narrowly for a single alloy family.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Differences between grey iron, ductile iron and cast steel<\/h3>\n<p style=\"margin:0 0 16px;\">Not all castings behave the same way against a cutting disc, and treating them as interchangeable is one of the most common planning mistakes on a mixed production floor. Grey iron tends to be more brittle and easier to cut but generates more dust. <strong style=\"color:#111;font-weight:800;\">Ductile iron<\/strong> has greater toughness and requires a more impact-resistant disc. <strong style=\"color:#111;font-weight:800;\">Cast steel<\/strong>, in turn, behaves closer to rolled steel in terms of hardness, though it can retain inclusions from the casting process. Identifying the exact casting type before fixing the disc reference prevents performance surprises between different production lines.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Impact of pre-cut sand cleaning<\/h3>\n<p style=\"margin:0 0 16px;\">When the part reaches the cutting station with poorly cleaned <strong style=\"color:#111;font-weight:800;\">mould sand<\/strong> residue, the disc suffers additional wear from contact with abrasive material that is not part of the metal itself. Coordinating effective pre-cleaning, even a basic one, with the shakeout area can significantly extend disc <strong style=\"color:#111;font-weight:800;\">service life<\/strong> at the subsequent cutting stage.<\/p>\n<h2 id=\"errores-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Common mistakes when cutting cast pieces<\/h2>\n<p style=\"margin:0 0 16px;\">The most common mistake is using a general-purpose disc designed for rolled steel on cast pieces with abrasive inclusions. The result is much faster wear than expected and a <strong style=\"color:#111;font-weight:800;\">cost per part<\/strong> that does not match production forecasts. Fine dust exposure from cutting <strong style=\"color:#111;font-weight:800;\">cast material<\/strong> with residual sand is also worth managing proactively, in line with resources such as the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.cdc.gov\/niosh\/topics\/silica\/\" target=\"_blank\" rel=\"noopener\">CDC NIOSH guidance on respirable silica dust<\/a>.<\/p>\n<p style=\"margin:0 0 16px;\">Another common failure is confusing cutting and grinding at the finishing stage: trying to smooth fine flash with a cutting disc reduces its <strong style=\"color:#111;font-weight:800;\">service life<\/strong> and does not achieve the surface control a specific grinding disc provides. A third mistake worth flagging is skipping the pre-cut sand check on a batch that looks visually clean: even a light sand film invisible at a glance can noticeably shorten disc life across a long run, so a quick surface check before cutting is worth the few extra seconds it takes.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Calculating real consumption per batch<\/h3>\n<p style=\"margin:0 0 16px;\">To calculate disc consumption in series production, it is worth logging how many parts are cut per disc under normal working conditions. If that number drops consistently, it may indicate a change in <strong style=\"color:#111;font-weight:800;\">cast material<\/strong> hardness or abnormal wear worth investigating with the supplier. This calculation also justifies internally the switch to a higher-performance reference when per-batch consumption clearly warrants it: presenting the figure as cost per finished part, rather than price per disc unit, helps production and procurement share the same criterion when deciding whether a higher unit price is worth fewer disc changes per shift.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Separating references by part type<\/h3>\n<p style=\"margin:0 0 16px;\">Not all cast parts have the same abrasiveness. Separating references by <strong style=\"color:#111;font-weight:800;\">alloy<\/strong> type and casting process allows the disc to be matched to each <strong style=\"color:#111;font-weight:800;\">production<\/strong> line, instead of using a single generic reference across the whole foundry. Labelling storage bins by alloy, rather than relying on operators to remember which disc goes where, is a small change that noticeably reduces mix-ups on a busy shop floor with multiple lines running in parallel.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Coordinating cutting and subsequent grinding<\/h3>\n<p style=\"margin:0 0 16px;\">Clearly defining the switchover point between cutting and grinding prevents operators from improvising with whichever disc is closest at hand. A simple reference sheet per part type, indicating where cutting ends and grinding begins, helps maintain the expected <strong style=\"color:#111;font-weight:800;\">performance<\/strong> of each consumable.<\/p>\n<h3 style=\"margin:26px 0 8px;color:#023a51;font-size:clamp(20px,5.2vw,22px);line-height:1.25;font-weight:800;\">Safety around foundry dust<\/h3>\n<p style=\"margin:0 0 16px;\">Cutting cast pieces generates more fine dust than cutting clean rolled profiles, especially when <strong style=\"color:#111;font-weight:800;\">mould sand<\/strong> residue is still present. Beyond standard eye and ear protection, it is worth reinforcing respiratory protection and station ventilation to reduce the operator&#8217;s accumulated exposure over a shift, following general guidance such as the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.hse.gov.uk\/pubns\/priced\/hsg17.pdf\" target=\"_blank\" rel=\"noopener\">HSE HSG17 guidance on the safe use of abrasive wheels<\/a>.<\/p>\n<h2 id=\"productos-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Abrasteel cutting discs for foundry<\/h2>\n<div style=\"display:grid;grid-template-columns:repeat(auto-fit,minmax(min(100%,250px),1fr));gap:18px;margin:24px 0;\">\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-basic-abrasteel.jpg\" alt=\"Abrasteel BASIC cutting disc\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">BASIC cutting disc<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">For <strong style=\"color:#111;font-weight:800;\">point adjustments<\/strong> with a portable grinder.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/cutting-discs\/basic-cutting-disc\/\">View product<\/a><\/p>\n<\/div>\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-top-aleaciones-hierro-acero-inoxidable.webp\" alt=\"Abrasteel TOP cutting discs\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">TOP cutting discs<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">Recommended for <strong style=\"color:#111;font-weight:800;\">risers and sprues<\/strong> in series production.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/cutting-discs\/top-cutting-dics\/\">View product<\/a><\/p>\n<\/div>\n<div style=\"border:1px solid #e8ebef;background:#fff;padding:16px;\"><img decoding=\"async\" style=\"display:block;width:100%;height:clamp(150px,44vw,185px);object-fit:contain;background:#f9fafb;margin:0 0 14px;\" src=\"https:\/\/www.abrasteel.com\/images\/disco-de-corte-xtrem-para-aceros-inoxidables.jpg\" alt=\"Abrasteel XTREM cutting disc\"><\/p>\n<h3 style=\"margin:0 0 8px;color:#023a51;font-size:clamp(19px,5vw,21px);line-height:1.25;font-weight:800;\">XTREM cutting disc<\/h3>\n<p style=\"margin:0 0 10px;color:#555f66;font-size:16px;line-height:1.55;\">For <strong style=\"color:#111;font-weight:800;\">cast stainless<\/strong> parts without contamination.<\/p>\n<p style=\"margin:0;\"><a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/cutting-discs\/xtrem-cutting-disc\/\">View product<\/a><\/p>\n<\/div><\/div>\n<p style=\"margin:0 0 16px;\">Review the full range on the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/cutting-discs\/\">Abrasteel cutting discs<\/a> page. For the subsequent flash-finishing stage, also check <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/en\/abrasive-discs\/rough-discs\/\">Abrasteel grinding discs<\/a> or download the <a style=\"color:#cc0000;font-weight:700;text-decoration:underline;text-underline-offset:3px;\" href=\"https:\/\/www.abrasteel.com\/wp-content\/uploads\/2022\/06\/Catalogo2017.pdf\">technical catalogue<\/a>.<\/p>\n<h2 id=\"abrasteel-fundicion\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Abrasteel as a technical supplier<\/h2>\n<p style=\"margin:0 0 16px;\">Abrasteel works with foundries that need discs capable of performing on abrasive materials without losing <strong style=\"color:#111;font-weight:800;\">service life<\/strong> part after part. We help differentiate cutting from grinding and adjust the reference according to alloy type and <strong style=\"color:#111;font-weight:800;\">production<\/strong> volume.<\/p>\n<p style=\"margin:0 0 16px;\">If your workshop handles cast parts of varying hardness, we can help you calculate the real <strong style=\"color:#111;font-weight:800;\">cost per part<\/strong> and define a <strong style=\"color:#111;font-weight:800;\">stable reference<\/strong> that keeps pace with series production. We can also review with you the exact switchover point between cutting and grinding in your production line, to match each consumable to the operation it is really meant for.<\/p>\n<p style=\"margin:0 0 16px;\">For foundries running mixed batches across grey iron, <strong style=\"color:#111;font-weight:800;\">ductile iron<\/strong> and <strong style=\"color:#111;font-weight:800;\">cast steel<\/strong> on the same line, we can help set up a simple reference matrix by alloy, so operators do not have to guess which disc suits the part currently on the bench. This is particularly useful for jobbing foundries, where casting composition can change from one order to the next, and it also simplifies onboarding when new operators join a shift without prior experience on every alloy the shop handles. A short note on the matrix about which castings arrive with heavier mould sand residue is worth adding too, because that single detail often explains more consumption variation between batches than the alloy itself.<\/p>\n<h2 id=\"preguntas-frecuentes\" style=\"margin:clamp(38px,9vw,54px) 0 18px;padding-bottom:10px;border-bottom:2px solid #e8ebef;color:#023a51;font-size:clamp(24px,6vw,30px);line-height:1.18;font-weight:700;\">Frequently Asked Questions (FAQs)<\/h2>\n<div style=\"margin:0 0 28px;border-top:1px solid #e8ebef;\">\n<details open style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Why does a conventional disc wear out faster on cast parts?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Because the cast piece can have harder zones and mould sand inclusions that are more abrasive than conventional rolled steel, accelerating disc wear.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Is cutting risers the same as grinding mould-line flash?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">No. Cutting risers and sprues is a cutting operation, while removing fine flash along the mould parting line is grinding. Using the cutting consumable for grinding reduces its service life and worsens the result.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">How is the real cost of a disc calculated in series production?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">By dividing the disc price by the number of parts it cuts before wearing out, not by disc unit. A more expensive disc with longer service life can be more profitable per finished piece.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Is grey iron cut the same way as ductile iron?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">No. Grey iron is more brittle and easier to cut but generates more dust; ductile iron has greater toughness and requires a more impact-resistant disc. It is worth identifying the type before fixing the reference.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">Why does mould sand affect disc performance?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Poorly cleaned sand residue acts as additional abrasive material that is not part of the metal, accelerating disc wear. Effective pre-cut cleaning at shakeout noticeably extends service life.<\/p>\n<\/div>\n<\/details>\n<details style=\"border-bottom:1px solid #e8ebef;background:#ffffff;\">\n<summary style=\"cursor:pointer;list-style-position:outside;padding:16px 0;color:#023a51;font-size:clamp(18px,4.8vw,21px);line-height:1.25;font-weight:800;\">What extra protection should be used against foundry dust?<\/summary>\n<div style=\"padding:0 0 16px;color:#232323;\">\n<p style=\"margin:0;\">Beyond eye and ear protection, reinforce respiratory protection and workstation ventilation, since cutting cast parts with residual sand generates more fine dust than cutting clean profiles.<\/p>\n<\/div>\n<\/details><\/div>\n<div data-abrasteel-sticky-cta=\"true\" aria-label=\"Abrasteel quick actions\" style=\"position:fixed;right:max(12px,env(safe-area-inset-right));bottom:max(12px,env(safe-area-inset-bottom));z-index:9999;width:min(260px,calc(100vw - 24px));max-height:calc(54vh - 24px);background:#ffffff;border:1px solid rgba(2,58,81,.16);box-shadow:0 18px 44px rgba(2,58,81,.20);overflow:auto;\">\n<div style=\"height:6px;background:linear-gradient(90deg,#cc0000 0%,#cc0000 38%,#023a51 38%,#023a51 100%);\"><\/div>\n<p><button type=\"button\" aria-label=\"Close notice\" onclick=\"this.closest('[data-abrasteel-sticky-cta]').style.display='none';\" style=\"position:absolute;top:10px;right:10px;z-index:2;width:32px;height:32px;border:1px solid #e8ebef;background:#ffffff;color:#023a51;font-size:18px;line-height:1;font-weight:800;cursor:pointer;\">x<\/button><\/p>\n<div style=\"padding:clamp(12px,3.5vw,16px) clamp(12px,3.5vw,16px) clamp(10px,3vw,14px);\">\n<p style=\"margin:0 0 6px;color:#cc0000;font-size:13px;font-weight:800;letter-spacing:.06em;text-transform:uppercase;\">Abrasteel support<\/p>\n<p style=\"margin:0 0 8px;color:#023a51;font-size:clamp(18px,4.8vw,20px);line-height:1.18;font-weight:800;\">Questions about foundry discs?<\/p>\n<p style=\"margin:0 0 12px;color:#555f66;font-size:clamp(14px,4vw,16px);line-height:1.45;\">We help you reduce the cost per part.<\/p>\n<\/div>\n<p><a style=\"display:block;padding:clamp(11px,3.2vw,13px) 14px;background:#cc0000;color:#fff;font-size:clamp(14px,3.8vw,15px);font-weight:800;text-align:center;text-decoration:none;\" href=\"https:\/\/www.abrasteel.com\/en\/contact\/\">Ask for technical advice<\/a><a style=\"display:block;padding:clamp(11px,3.2vw,13px) 14px;background:#000;color:#fff;font-size:clamp(14px,3.8vw,15px);font-weight:800;text-align:center;text-decoration:none;\" href=\"https:\/\/www.abrasteel.com\/wp-content\/uploads\/2022\/06\/Catalogo2017.pdf\" target=\"_blank\" rel=\"noopener\">Download catalogue<\/a><\/div>\n<\/article>\n","protected":false},"excerpt":{"rendered":"<p>Guide to choosing cutting discs for foundry work: risers, sprues, casting flash and Abrasteel products for cast parts.<\/p>\n","protected":false},"author":1,"featured_media":6249,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[178],"tags":[],"class_list":["post-7791","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abrasive-discs"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7791","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/comments?post=7791"}],"version-history":[{"count":1,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7791\/revisions"}],"predecessor-version":[{"id":8497,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/posts\/7791\/revisions\/8497"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/media\/6249"}],"wp:attachment":[{"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/media?parent=7791"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/categories?post=7791"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.abrasteel.com\/en\/wp-json\/wp\/v2\/tags?post=7791"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}